DHF UER Corner Radius End Mill
رمز المنتج: DHF-UER
DHF UER solid carbide 4-flute corner-radius end mill, Super MG submicron-grain carbide at 0.4 micron, rated for HRc greater than 60. Diameter range 2.0mm to 16.0mm with corner radius options from 0.2mm to 3.0mm. Catalog-mode family, enquiry-based.
التفاصيل الفنية متوفرة باللغة الإنجليزية.
Overview
The DHF UER is a solid carbide, 4-flute corner-radius end mill built on a Super MG submicron-grain carbide substrate at 0.4 micron grain size, with a 45 degree helix angle. It is rated for machining materials with HRc greater than 60, covering a diameter range from 2.0mm to 16.0mm with corner radius options from 0.2mm to 3.0mm. UER is offered as a catalog-mode, enquiry-based family product.
Manufactured by DHF. Visit the official DHF website for more information.
Key Features
- Solid carbide, 4-flute corner-radius end mill
- Super MG submicron-grain carbide substrate, 0.4 micron grain size
- 45 degree helix angle
- Rated for machining materials with HRc greater than 60
- Diameter range from 2.0mm to 16.0mm
- Corner radius options from 0.2mm to 3.0mm
Technical Specifications
| Flute count | 4 |
| Grain structure | Super MG, 0.4 micron |
| Helix angle | 45 degrees |
| Max. workpiece hardness | HRc greater than 60 |
| Diameter range | 2.0mm to 16.0mm |
| Corner radius range | 0.2mm to 3.0mm |
| Flute length range | 6mm to 45mm |
| Overall length (O.A.L.) range | 50mm to 100mm |
| Shank diameter range | 4mm to 16mm |
Applications
Solid carbide milling of hardened materials with HRc greater than 60, where a corner-radius profile is needed for edge strength or surface finish.
Need this product? Contact Demas for availability, pricing, and technical support.
